Our design philosophy is to simply eliminate coloration from cable itself.
We never load it with character to create seemingly impressive sound, therefore avoid utilizing any special material, particular configuration nor special treatment to add some impressive feature. We passionately care for fundamental quality and spare no effort to realize it, but we believe it should always sound natural as if the cable does not exist.
SL110XX; is Balanced 2-core Interconnect Cable, terminated with XLR plugs, usable for both Analogue and Digital (AES/EBU) with 110 ohm impedance.
ConductorHigh purity Oxygen-Free-Copper, extensively annealed in low temperature to rectify mechanical distortion/stress from extrusion process for smoother signal transport, due to its uniformed internal structure. |
InsulationTwo layers of polymer polyolefin of different mass to suppress resonance more effectively. Polyolefin is the best insulator with property of low dielectric constant (1/4 to PVC), therefore coloration factor is minimized. We also developed a method to realize tight contact between conductor and insulator in order to eliminate random gap thus minimized strain distortion between conductors. |
||||||||||||||||||||
Tube Core StructureConductor is wrapped spirally around 0.5mm dia. core tube, and covered with resonation absorbing cross-linked polyethylene insulator; for low distortion and minimum loss of information. And having air space internally, dielectric constant factor and electrostatic capacitance are further lowered |
Air Damper Tubeonductive core is equipped with two polyethylene tubes on each side which act as dampers for the resonating conductor, releasing unwanted resonance into air space. |
||||||||||||||||||||
Copper Foil ShieldingCopper foil can shut out exogenous R/F noise completely, also very effective against low frequency noise far more than, usual copper mesh or aluminum foil. |
 |
||||||||||||||||||||
|
|||||||||||||||||||||