Audio Products

| NEWS FLASH | »•iˆÄ“à | »•iŽ‘—¿¿‹ | ƒŒƒrƒ…[EƒRƒ‰ƒ€ | D.I.Y »ì | ƒŒƒ“ƒ^ƒ‹ | Œfަ” |
subglobal8 link | subglobal8 link | subglobal8 link
small logo

DR-510 / DB-510

The supreme coaxial cable which achieves perfect pure silver transmission.

The concept passes on the signal without deterioration. The answer is Puer silver. "FTVS-510"arranges the high quality 5N pure silver in a center conductor to decrease transmission loss.The shield of three layers defends the signal from the noise, and sends a pure signal."FTVS-510"is supported of the visual and the sound(digital 75Ħj.
"DR-510 / DB-510" is a processing of " FTVS-510" to the Connector(SLSC/SLSB).A center pin does perfect transmission by high purity (4N) solid silver.The design is a silver coating mesh to shine. "DR-510 / DB-510" is a digital cable which appeared from the highest material.

5N Pure Silver Conductor

5N(99.9995%) pure silver was used for the central conductor.

The continuous casting with the furnace of the high-frequency electricity in the under of an advanced production control. cold rolling which reached as many as 19 processes . annealing work over two degrees . Only it processed pulling out with the diamond die, the skin path was processed, the purity of silver was not high, and high-quality "Silver" that there is no space in the grain boundary was used.

Insulation

The insulator uses FEP(Teflon) that the permittivity is low in the insulator. And it adopts the composite structure with FPE(Foamed polyethylene) aiming at the vibration diffusion. It ensured not only an electric characteristic but also the vibration measures.

Semiconductor Layer

Teflon is charged with electricity by static electricity.And it has a bad influence on a signal. We prepared the semiconductor layer in the cable and solved those problems.A semiconductor layer absorbs static electricity and discharges.

2-Layer Shield

A shield is two-layer structure. The copper shield which prevents a low frequency noise.The silver plating shield which prevents a high frequency noise.Two shields prevent a noise of a wide band.

Connectors

The oyaide is thought that the connector is a component parts.The connector should improve electric conductivity of the cable and contact in the plug . "DR510/DB510" achieved perfect pure silver transmission by adopting the pure silver contact connector(SLSC/SLSB).

Specification @DR-510 / DB-510

Cable FTVS-510(5N pure silver Conductor,75ohm Coaxial)
Plug DR-510 : SLSC(pure silver Connector RCAj
DB-510 : SLSB(pure silver Connector BNCj
Cable Length DR-510 : 0.7m/1.3m
DB-510 : 0.7m/1.3m
Release Date 11/15/2005